How big is the display on the pioneer xc-hm86?

The XC-HM86 features a 3.5” LCD display with a user-friendly GUI. You can see the format, sampling rate, bit rate, elapsed time, and album artwork for the playing song. It also becomes an operational display for setting and controlling functions, without having to use a PC or mobile device.

Where does the HDMI go on a pioneer receiver?

The HDMI out goes to the projector and the digital audio out to the receiver. You won’t get lossless audio like Dolby TrueHD but will work fine with Dolby Digital and DTS. It does sound like the Pioneer receiver has an HDMI switching problem. That’s not unusual.

Is there a problem with the pioneer receiver?

It does sound like the Pioneer receiver has an HDMI switching problem. That’s not unusual. Assuming that it’s out of warranty the cost of repairing the HDMI board is prohibitive. You could get an HDMI input selector with audio extraction. Connect your sources to it with HDMI.

Why does my pioneer HDMI projector not work?

The projector works fine on its own, but shows ‘No signal’ when plugged up to the HDMi output from the Receiver and any input into – Apple TV, PS4 I’ve done hard reset, and it does / did occasionally work, change the source and then nothing again, no signal.

It does sound like the Pioneer receiver has an HDMI switching problem. That’s not unusual. Assuming that it’s out of warranty the cost of repairing the HDMI board is prohibitive. You could get an HDMI input selector with audio extraction. Connect your sources to it with HDMI.

The HDMI out goes to the projector and the digital audio out to the receiver. You won’t get lossless audio like Dolby TrueHD but will work fine with Dolby Digital and DTS. It does sound like the Pioneer receiver has an HDMI switching problem. That’s not unusual.

How do I get on screen display on my pioneer TV?

I am trying to get the OSD to show up on my TV, but no luck. Press RECEIVER on the remote control, then press the SETUP button. An on-screen display (OSD) appears on your TV. Clearing all the remote control settings: While pressing the RECEIVER button, press and hold the 0 button for three seconds. This does not work either.

The projector works fine on its own, but shows ‘No signal’ when plugged up to the HDMi output from the Receiver and any input into – Apple TV, PS4 I’ve done hard reset, and it does / did occasionally work, change the source and then nothing again, no signal.