What does it mean when my stereo Says protect?

protection mode
Your stereo receiver is going into protection mode because the receiver has an internal short, a speaker is bad or the speaker wiring has a problem, such as incorrect wire gauge or bad connections.

What to do if your home power protector is flashing?

This is normal. To reset the internal surge protection circuit unplug the AC power cord from the wall for at least 30 minutes. Ensure the top of the home audio device has proper ventilation to keep it from overheating. Running the home audio device in a poorly ventilated cabinet can trigger the protection circuit.

What to do if push power is flashing in?

Turn off the home audio device, and remove all speaker wires from the back. Then turn the device back on and check if the issue is resolved. If it is still having the same issue, turn off the device again and let it rest for at least 30 minutes before turning it on again.

Why is the word protector flashing on my speakers?

If the words PROTECTOR and PUSH POWER appear in alternating sequence on the display of your home audio device, or if the word PROTECT or PROTECTOR appears, there may be an external speaker issue or connection issue that is triggering the protection circuit.

Why is my Sony home audio protector flashing?

Sony Home Audio Protect Flashing 1 If there has been an electrical surge or power outage, then the internal surge protection inside the home audio device… 2 Ensure the top of the home audio device has proper ventilation to keep it from overheating. Running the home audio… 3 Reduce the volume level. If the impedance of any of the… See More….

Why is push power / protect / protector flashing in my speakers?

If the words PROTECT / PROTECTOR and PUSH POWER appear in alternating sequence on the display of your home audio device, or if the words PROTECT or PROTECTOR appear, there may be an external speaker issue or connection issue that is triggering the protection circuit.

This is normal. To reset the internal surge protection circuit unplug the AC power cord from the wall for at least 30 minutes. Ensure the top of the home audio device has proper ventilation to keep it from overheating. Running the home audio device in a poorly ventilated cabinet can trigger the protection circuit.

If you continue to use the low impedance (outside of specifications) speakers and you ran the Auto Calibration, check your SPEAKER SETUP and individual speaker LEVEL to reduce any speaker LEVEL with a positive gain to 0.0dB or less. Turn off the home audio device, and remove all speaker wires from the back.

Why is my push power protector not working?

If a cord is frayed or in contact with another terminal, an error will occur. Fix the connection to prevent a short circuit. Make sure the speaker impedance is within the recommended range. If the impedance is not correct, sound will not come out properly and the speaker may be damaged.