What should I do if I accidentally touch my old radio?

Your old radio may shock you if you accidentally touch the metal chassis or any exposed metal (i.e. exposed volume or tuning knob). Make sure you re-install knobs if they have been removed or fallen off Do not put radio near water or submerge your radio while it’s plugged in or turned on.

How to restore a radio from the 1930’s?

After taking out the three thumb screws that hold in the large metal frame, I removed the speaker and antenna. This radio as with most of the ones from the 1930’s to 1950’s only had one speaker, it was in good shape as was a few of the vacuum tubes not cracked.

How do you make a radio dial plug?

Here is the step by step method I used to make a plug or mold for my display: Use the original metal bezel ( the part that held the original dial cover) as a guide and trace the inside outline on your balsa and cut it out. Test fit your balsa plug and make it fit a little loose by sanding it down.

How can I get my AM radio to work?

Either an extendable one such as yours has (see video of your model) or a wire hanging out of the case, Also a quick check of all the capacitors in old radios is nearly mandatory as they are prone to leakage over time, although since the AM works in the radio, you may just have to check around the FM antenna coupling/ tuner/oscillator section.

Either an extendable one such as yours has (see video of your model) or a wire hanging out of the case, Also a quick check of all the capacitors in old radios is nearly mandatory as they are prone to leakage over time, although since the AM works in the radio, you may just have to check around the FM antenna coupling/ tuner/oscillator section.

Your old radio may shock you if you accidentally touch the metal chassis or any exposed metal (i.e. exposed volume or tuning knob). Make sure you re-install knobs if they have been removed or fallen off Do not put radio near water or submerge your radio while it’s plugged in or turned on.

Why is my AM radio not working on my FM?

You may have to take to radio to a technician who can align the tuner. It takes a special person who knows how to do this with specialized electronic testing equipment. If it is a vintage tube radio could be a bad tube that is keeping it from bringing in stations. Make sure sure you also have an FM antenna connected to it.

What happens when you use retro radio farm?

Retro Radio Farm replaces all old beeswax and paper capacitors but wax residue may remain on the circuit board, in crevices, and covering components. Over prolonged usage periods, this was may melt and emit faint odors and small amount of smoke.