Why is my Apple TV not connecting?

Try connecting your Apple TV directly to your router, or cable or DSL modem using an Ethernet cable. Or on Apple TV (3rd generation), go to Settings > General > Update Software. If there’s an update, install it. Then unplug your Ethernet cable and try to join your Wi-Fi network again.

How do I connect my Apple TV to my aux?

Hook up your Airport Express to power, and connect the optical audio cable to it (via 3.5mm adapter), and to your sound system. Turn on your fourth-generation Apple TV and go to Settings > Audio and Video > Audio Output. Any AirPlay compatible speaker is listed here. Find your Airport Express and click on it.

Can a Yamaha receiver connect to any other device?

All devices, including the Yamaha are on the same network (the Yamaha via an ethernet cable to the same router that all other devices are connected to and getting IP addresses from). The Yamaha app that you use to remote control the receiver can connect to the receiver just fine.

Is the Yamaha Airport Express 2 compatible with Apple TV?

My 3 AppleTV’s and my Airport Express 2 all show up and are working fine with AirPlay for both video and audio. But trying to stream music to the Yamaha via Apple Music or a video via the Apple TV app no longer works.

How can I Check My HDMI connection on my Apple TV?

Select Match Content, then turn on Match Dynamic Range. Check your HDMI connection: Apple TV can run a test to see if there are any problems with your HDMI connection. Select Check HDMI Connection, then follow the onscreen instructions.

What do I need to hook up my Apple TV to my speakers?

Use an audio extractor ($15-$300) Pick up an HDMI-to-Toslink (optical audio) extractor. This lives in-between your TV and Apple TV, routing the Apple TV’s HDMI connection through a tiny box that separates the HDMI video signal and the audio signal. To make this work, you’ll need a spare power port and extra HDMI cable.

Can a Apple TV connect to a Yamaha receiver?

Sound ran from optical audio to receiver. Apple 4 does not have this. I have also set up the Apple 4 connected directly to a tv, which works, though have a audio out from tv to another Yamaha receiver, which does work. However, one is required to utilize both the tv volume control and receiver volume control .

Select Match Content, then turn on Match Dynamic Range. Check your HDMI connection: Apple TV can run a test to see if there are any problems with your HDMI connection. Select Check HDMI Connection, then follow the onscreen instructions.

Use an audio extractor ($15-$300) Pick up an HDMI-to-Toslink (optical audio) extractor. This lives in-between your TV and Apple TV, routing the Apple TV’s HDMI connection through a tiny box that separates the HDMI video signal and the audio signal. To make this work, you’ll need a spare power port and extra HDMI cable.

How can I hook up my old Apple TV to my new Apple TV?

How to route your old Apple TV’s audio to your new Apple TV. Hook up your third-generation Apple TV to power, and connect the optical audio cable to your sound system. (You don’t need to use an HDMI cable for anything.) Turn on your fourth-generation Apple TV and go to Settings > Audio and Video > Audio Output.